The AR-15 uses a direct-impingement system with a gas tube to cycle the bolt: The spent casing is ejected, the bolt drives forward, and a new round is chambered.The kinetic energy of the spent casing drives the bolt back into the buffer tube.That same gas forces the spent casing to slam against the bolt inside the chamber.The rapid expansion of gas expels the bullet from the barrel.Powder burns in the firing chamber and creates gas.The firing pin hits the primer on the 9mm cartridge.That’s because the AR9 usesīlowback to cycle the bolt. Look closely at an AR9 upper, and you won’t see a gas tube underneath the handguard. Except the 9mm variant of the AR platform uses some different parts and functions to provide semiautomatic fire. Since the AR9 pistol and AR-15 appear so similar, let’s compare the two first. A 9mm-specific buffer is required inside your buffer tube, but we'll touch on that later. The AR9 pistol instead uses a new lower receiver (theĪR9 lower) and a stripped AR-15 upper receiver with a 9mm barrel, new bolt carrier group, and an AR-15 buffer system and standard 5.56/.223 lower parts kit. Converted 5.56/.223 guns use special parts to adapt the factory upper and lower receivers for the 9mm cartridge. But this particular 9mm weapon is not just an AR-15 with a 9mm Parabellum conversion kit installed. The AR9 pistol is a 9mm variant of the AR-15. This is your ultimate AR9 pistol guide! We’re breaking down everything you need to know to build one yourself: What the AR9 pistol is, what separates it from an AR-15, parts compatibility, 9mm Parabellum's ballistics, buffer weight, barrel length, twist rate, and magazines. All data and recommendations in this guide were compiled from real shooters who've built and tested AR9s with different parts.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |